Incubator: Service_______New_______Used_______W/Auto_____Cost:$________

Components received for service: Dome Assy._____  Base____Screen____
Turning Ring or Grid_______Plastic Strip_______Turner______Arm______ “L” Bolts______Dome Rod_____Thermometers (___)   3”   6”    S    M   Bracket_____ Hatching Manual_____Bottle_____ Nut_____ Factory Box______ Packing______ RX Bottle Base & Hose______

New TX Incubator Custom Setup, Modification And Check Out ....................$40.00

Includes: Install Teflon Tape, modify bottle nut & bottle, if needed - disassemble turning ring & thermometers - reform ring - reassemble strap & thermometers on ring, disassemble dome, disassemble motor - saturate oil wicks - balance armature (if needed) - reshim armature - reassemble for reversed rotation with new screws, modify motor housing, reassemble motor & housing using new isolators, new rubber cushions and diaphragm, balance fan & press it on motor shaft, check tightness & alignment of heater insulators, reassemble dome, add special washers
to the temperature adjustment knob to provide safety friction, and test temperature
regulation & fan operation.

Standard Service Package For TX Incubator ....................................................$35.00

Includes: Disassemble dome, clean dome & motor housing, disassemble motor - check motor bearings - fill wicks - reassemble motor, clean baffle & temperature control board, check tightness & alignment of heater insulators, reassemble dome, renew or add Teflon in incubator bottom, check screen for flatness, check turning ring height from screen, modify bottle & nut (if req.) and test temperature regulation & fan operation.
Fan & Fan Motor Modification Package (With Service Package Only) ........$30.00
Includes: The fan, fan motor, & motor housing modifications listed above for New Incubator Custom Setup,& Modification.

Change TX-6 Temperature Control to Ten Turn Control (TX-7 Type) ..........$30.00

Install A Ten Turn Digital Readout Locking  Knob…………....……………..$25.00

Cleaning Charge For Heavily Soiled User Accessible Areas (Min).................$  5.00

Standard Service Package For RX Incubators ..................................................$40.00

 Includes:  Disassemble top, clean, check & service motor, reassemble and test temperature regulation.

Other Service And/Or Parts (List). _________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

____________________________________________Shipping & Packing $________

_______________________________________Total Other Service Parts $________

Total Unit Cost &/Or Service, Parts, Shipping & Customizing Charges..$________
The Bird Barn Title
           
   

LYON INCUBATOR SALES

& SERVICE ORDER FORM

  
           

THE BIRD BARN
4137 N. Colonial Ave.
Portland, OR 97217
(503) 288-1928 - E-mail:
TBB@thebirdbarn.biz
www.thebirdbarn.biz

Date:_____/_____/_20_____ Invoice #________

Name:_____________________________________________

Address:___________________________________________

City:_______________________State:____ Zip:__________

Phone #:(_____)______-______________________________